Lost in Space Robot [ 98 Movie Version ]

P.J.C.2.0

Veteran Member
I had been looking for weeks to find something to make the floor of the Robot's Diorama Base with and Finally i found this Black Plastic Mesh screen used for a lot of D.I.Y Projects....

I got 3 screens for $11 dollars on Amazon and they were here in 3 Day's once it was here i looked at it Cut a piece for the Base and then Sprayed it with Primer and then Silver now just got to get it glued down to the Base.
 

Attachments

  • DSCF1338.JPG
    DSCF1338.JPG
    692.8 KB · Views: 4
  • DSCF1339.JPG
    DSCF1339.JPG
    915.1 KB · Views: 3
  • DSCF1340.JPG
    DSCF1340.JPG
    928.3 KB · Views: 3
  • DSCF1341.JPG
    DSCF1341.JPG
    1 MB · Views: 3

P.J.C.2.0

Veteran Member
I'm trying to do as best i can but i'm going to have to get a little more Creative the this i'm going to have to go though all the extra Parts of other Models i still have around.
 

Attachments

  • DSCF1362.JPG
    DSCF1362.JPG
    778.4 KB · Views: 4
  • DSCF1363.JPG
    DSCF1363.JPG
    876.8 KB · Views: 5
  • DSCF1365.JPG
    DSCF1365.JPG
    669.2 KB · Views: 4
  • DSCF1367.JPG
    DSCF1367.JPG
    1,019.3 KB · Views: 5
  • DSCF1368.JPG
    DSCF1368.JPG
    968.6 KB · Views: 4
  • DSCF1372.JPG
    DSCF1372.JPG
    688 KB · Views: 4
  • DSCF1374.JPG
    DSCF1374.JPG
    566 KB · Views: 4

P.J.C.2.0

Veteran Member
Hoping i don't have to Start All Over
6 White LED's on both side creating something of a Path Way that the Robot is going down.
 

Attachments

  • DSCF1396.JPG
    DSCF1396.JPG
    647.1 KB · Views: 3
  • DSCF1397.JPG
    DSCF1397.JPG
    798.4 KB · Views: 4
  • DSCF1398.JPG
    DSCF1398.JPG
    856.2 KB · Views: 3
  • DSCF1399.JPG
    DSCF1399.JPG
    922.2 KB · Views: 3
  • DSCF1400.JPG
    DSCF1400.JPG
    882.1 KB · Views: 4

P.J.C.2.0

Veteran Member
Do to a Drilling Mass up i have to Re-drill out the Holes for the Buttons....

I glued a Flat piece of wood on where the Holes were filled the holes with Apoxie Sculpt let it Harden real good before i Re-drill the Holes....

The Damage Wiring is coming out alright i tested the Fiber Optic Lighting and looks alright.
 

Attachments

  • DSCF1416.JPG
    DSCF1416.JPG
    428.9 KB · Views: 3
  • DSCF1418.JPG
    DSCF1418.JPG
    467.7 KB · Views: 3
  • DSCF1419.JPG
    DSCF1419.JPG
    518.1 KB · Views: 3
  • DSCF1420.JPG
    DSCF1420.JPG
    536.2 KB · Views: 3
  • DSCF1421.JPG
    DSCF1421.JPG
    561.7 KB · Views: 3
  • DSCF1423.JPG
    DSCF1423.JPG
    547 KB · Views: 3
  • DSCF1424.JPG
    DSCF1424.JPG
    517 KB · Views: 3

P.J.C.2.0

Veteran Member
The Button Holes have been Re-drilled and the Buttons are Hot Glued in going to wait till the Effects Board arrive and test it before Gluing in the Speakers....
One of the Broken Cables lines has been Glued on the base and the Lighting Tested and it works Good.
 

Attachments

  • DSCF1440.JPG
    DSCF1440.JPG
    697 KB · Views: 2
  • DSCF1441.JPG
    DSCF1441.JPG
    937 KB · Views: 2
  • DSCF1443.JPG
    DSCF1443.JPG
    721.8 KB · Views: 2
  • DSCF1445.JPG
    DSCF1445.JPG
    654.6 KB · Views: 2

P.J.C.2.0

Veteran Member
The Pathway light are all hooked up and the Damaged Fiber Optic Wiring lines are working good Now i'm going to give the Pathway a light Spray of Metallic Gray to darken it and bring that Silver Shine down a little....

The Lighting and Sound Effects Board arrived Saturday it's installed in the Base on and hooked up to these two Big Speakers with some Holes drilled out on top of the base for the Sound and the 3 LED Light Sync up Circuit is for the 3 Red Breathing LED's on the Base and i'm going to add Two more lights to the Rear of the Pathway....

I'm about to upload a Video of the Sound effects on YouTube i'll post after it's Uploaded.
 

Attachments

  • DSCF1469.JPG
    DSCF1469.JPG
    760 KB · Views: 1
  • DSCF1472.JPG
    DSCF1472.JPG
    653.1 KB · Views: 1
  • DSCF1473.JPG
    DSCF1473.JPG
    677.9 KB · Views: 1
  • DSCF1474.JPG
    DSCF1474.JPG
    700.7 KB · Views: 1
  • DSCF1476.JPG
    DSCF1476.JPG
    781.7 KB · Views: 1
  • DSCF1478.JPG
    DSCF1478.JPG
    706.9 KB · Views: 1
  • DSCF1480.JPG
    DSCF1480.JPG
    1.2 MB · Views: 1
  • DSCF1482.JPG
    DSCF1482.JPG
    677.9 KB · Views: 1
  • DSCF1483.JPG
    DSCF1483.JPG
    511.9 KB · Views: 1

P.J.C.2.0

Veteran Member
The Robot is Done....
Robot is glued to his Base the Lighting is all hooked up and working alright ... The Breathing Red LED's are working and 2 Blue SMD LED's are glued to the rear of the base inside 2 Clear Cap's and i finished the base after giving it a light Spray of Metallic Gray.

Now I'm thinking about have a Name Plate made for the Robots Base....

I'll make and Upload a Video on YouTube Later when i get a Minute to make it.
 

Attachments

  • DSCF1489.JPG
    DSCF1489.JPG
    691.1 KB · Views: 2
  • DSCF1492.JPG
    DSCF1492.JPG
    590.2 KB · Views: 3
  • DSCF1493.JPG
    DSCF1493.JPG
    597.7 KB · Views: 3
  • DSCF1499.JPG
    DSCF1499.JPG
    779.1 KB · Views: 3
  • DSCF1500.JPG
    DSCF1500.JPG
    773.1 KB · Views: 2
  • DSCF1501.JPG
    DSCF1501.JPG
    643.9 KB · Views: 2
  • DSCF1485.JPG
    DSCF1485.JPG
    783 KB · Views: 2
  • DSCF1486.JPG
    DSCF1486.JPG
    743.9 KB · Views: 2
  • DSCF1487.JPG
    DSCF1487.JPG
    736.3 KB · Views: 2
Top