SeaQuest DSV Model.

P.J.C.2.0

Veteran Member
This is my old SeaQuest DSV Model it's the first one i built while i was waiting for some things i ordered to arrive i decided to Redo the Paint on this Model and ended up redoing some things to the Models Base to added some New Clear Mounting rods i cut off of a Parts Tree from another Kit and some Fiber Optic's for the two smaller sub's and two drones ....

But than i Remembered i had another Base from another SeaQuest Model i did that didn't work out and had to trash it so I'm going to use it as a New Base for the Model.
 

Attachments

  • DSCF9565.JPG
    DSCF9565.JPG
    1.9 MB · Views: 29
  • DSCF9566.JPG
    DSCF9566.JPG
    1.8 MB · Views: 29
  • DSCF9567.JPG
    DSCF9567.JPG
    1.8 MB · Views: 29
  • DSCF9568.JPG
    DSCF9568.JPG
    2 MB · Views: 31
  • DSCF9571.JPG
    DSCF9571.JPG
    2 MB · Views: 25
  • DSCF9575.JPG
    DSCF9575.JPG
    583.4 KB · Views: 27
  • DSCF9576.JPG
    DSCF9576.JPG
    550.2 KB · Views: 30

Ray Martin

Veteran Member
Nice! Beyond the pilot, I don't think I ever watched this series. I think I vaguely remember something about an annoying kid and an animatronic dolphin, but that's about it.
 

P.J.C.2.0

Veteran Member
Do to a Major Mass up i ended up having to Repaint the SeaQuest again and i think it looks much much Better now.... Now you can see the 3 Different Blue Colors i used to Repaint my old SeaQuest Model....

What i was trying to do was been out the Bio-Skin Line's of the SeaQuest's Hull ..... But that didn't work out so good so had to Repaint....
I also Painted the small SeaQuest DSV Logo i just Painted it Gold with Silver Letters....

Let me know if you guy's think it looks better then the First Repaint job.
 

Attachments

  • DSCF9653.JPG
    DSCF9653.JPG
    585.4 KB · Views: 31
  • DSCF9654.JPG
    DSCF9654.JPG
    561.3 KB · Views: 28
  • DSCF9656.JPG
    DSCF9656.JPG
    623.5 KB · Views: 29
  • DSCF9657.JPG
    DSCF9657.JPG
    616.8 KB · Views: 30
  • DSCF9658.JPG
    DSCF9658.JPG
    552.8 KB · Views: 32
  • DSCF9662.JPG
    DSCF9662.JPG
    686.1 KB · Views: 31
  • DSCF9666.JPG
    DSCF9666.JPG
    583 KB · Views: 32
  • DSCF9665.JPG
    DSCF9665.JPG
    566 KB · Views: 30

Ray Martin

Veteran Member
It's looking a lot better, in my opinion. If you're up for suggestions... I took a look at a bunch of images of the craft, and I think your model would greatly benefit from some highlight dry-brushing on the raised detail.
 

P.J.C.2.0

Veteran Member
It's looking a lot better, in my opinion. If you're up for suggestions... I took a look at a bunch of images of the craft, and I think your model would greatly benefit from some highlight dry-brushing on the raised detail.
Dry-brushing is what I tried to do and that's what I mess up and why I had to Repaint the the model and I don't have enough blue paint colors to try again so I'm just going to Leave it as it is unless I think of an other way to Improve it.
 
Top